Indications It’s Time for Dishwasher Repair

Nothing could be grosser than opening up the dishwasher after its cycle has finished, only to find that the bottom of the machine is full of dirty water and food particles.

Dishwashers see some of the heaviest use of all domestic appliances. Thus, it is common for them to develop various unique problems and issues as time passes. Recognizing the signs of such issues is a key skill for any homeowner.

This blog outlines three clear indications that it’s time for professional dishwasher repairs for homeowners who want to improve their troubleshooting skills while minimizing the chances of needing emergency plumbing service.

Standing water

Nothing could be grosser than opening up the dishwasher after its cycle has finished, only to find that the bottom of the machine is full of dirty water and food particles. Unfortunately, this is one of the most commonly faced dishwasher issues. That’s because grease and food debris naturally build up at the bottom of the machine and inside the drain line over time.

Eventually, all that gunk will cause clogs in the drain line that connects the dishwasher to the home’s plumbing. Even if that is not the case, drain lines tend to become kinked, warped, or otherwise damaged. Thus, the problem may involve clearing out a stubborn clog or replacing the drain line entirely. Contact a professional repair person to help establish which route you will need to take.

Cold dishes

Another frustration is dishes that aren't hot even seconds after the wash cycle has ended. Since heat is critical in cleaning and sanitizing dishes and keeping germs from building up on dishware and inside your machine, lack of heat is a significant problem. Cold dishwater almost always indicates that the heating element has failed.

To verify this is the problem, a repair technician must open the machine to access the heating element. Then, they will test for proper continuity using the tool known as a multimeter. If the heating element is faulty, they will install an appropriate replacement.

Overfilling

If the dishwasher regularly fills with too much water, it can put excessive strain on the pump motor and increase the chances that the door gasket will develop leaks. Overfilling is generally the result of a float valve stuck in its open position, the result of food and grease build-up on the valve stem. A repair technician can simply correct the problem by disassembling, cleaning, and reassembling the float valve.

Evenflow Home Services has earned a strong reputation for providing comprehensive residential and commercial plumbing services. Emergency services available. Call today at  (210) 941-3503.